Skip to content

NitroTek

A-10 WARTHOG 64MM 5CH EDF TWIN RC JET - 2.4GHZ

  • Wingspan
    		• 1030mm
  • Length
    		• 949mm
  • Radio System
    		• 5Ch Tx and 6 Ch Rx
  • Battery
    		• 2500 mAh,11.1V
  • Range
    		• 1000m

      ,
    • Twin 64mm EDF, twin ESC, twin Motor
      • ,
    • 8 servos
      • ,
    • Brushless motor and 25A ESC
      • ,
    • Suspension electric retract system
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Retractable landing gear
      • ,
    • Stunning paintwork
      • ,
    • Twin 64mm electric ducted fans
      • ,
    • State of the art components2.4G Transmitter
      • ,
    • Can perform amazing aerobatics
      • ,
    • Powerful batteries
      • ,
    • Approx 15min flight time
      • ,
    ,

    The A-10 Thunderbolt II (A.K.A. the Warthog) is an American ...

    Read more

    NitroTek

    HE 162 SALAMANDER 64MM RC EDF FIGHTER JET - 2.4GHZ

  • Wing span
    		• 790mm 
  • Length
    		• 988mm 
  • Flying Weight
    		• 600g 
  • Wing Load
    		• 47g/dm² 
  • Wing area
    		• 12.8dm² 
  • Radio System
    		• 4Ch Tx and 6 Ch Rx
  • Battery
    		• 3 Cell Li-Po ,1300 mAh,11.1V
  • Range
    		• 1000m

      ,
    • Four 9 gram servos Brushless motor 
      • ,
    • 25A ESC 
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64mm electric ducted fans
      • ,
    • State of the art components
      • ,
    • 2.4G Transmitter 
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    Heinkel's He 162 Volksjäger ("People's Fighter") was a German single-engine, ...

    Read more

    NitroTek

    F-35 LIGHTNING II 64MM RC EDF RTF JET - 2.4GHZ

  • Wing span
    		• 608mm 
  • Length
    		• 840mm 
  • Flying Weight
    		• 600g 
  • Wing Load
    		• 57g/dm2 
  • Wing area
    		• 8.7dm2 
  • Radio System
    		• 4Ch TX and 6 Ch Rx, 
  • Battery
    		• 3 Cell Li-Po, 1300 mAh, 11.1V
  • Range
    		• 1000m

      ,
    • 9 gram servos 
      • ,
    • Brushless motor and 25A ESC 
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • 2.4G Transmitter 
      • ,
    • Can perform amazing aerobatics
      • ,
    • Is capable of the 'Cobra Manoeuvre'
      • ,
    ,

    The F-35 Lightning II is a, single-seat, single-engine, stealth multirole ...

    Read more

    NitroTek

    HSP GLADIATOR 1/10TH SCALE NITRO OFF ROAD TRUGGY

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 300mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 2 Speed
    		• 5.84
  • Ground Clearance
    		• 35mm
  • Wheel Diameter
    		• 105mm
  • Radio
    		• Stick type
  • Engine
    		• Infinity .18

      ,
    , ,
      ,
    • Four wheel drive system
      • ,
    • Hi-spec easy maintenance diffs
      • ,
    • 6061/T6 anodized aluminum chassis
      • ,
    • 13.8g lightweight aluminum flywheel
      • ,
    • Disc brake system
      • ,
    • Extra large 75cc leak proof fuel tank
      • ,
    • Hard wearing truggy tyres
      • ,
    • Top quality 1/10th scale wheel rims
      • ,
    • Oil filled shock absorbers
      • ,
    • High flow dual foam element air filter
      • ,
    • 5-position adjustment on tower
      • ,
    • Camber, toe in/out adjustment
      • ,
    • 3mm shock towers, oil-pressured
      • ,
    • Composite lower arms, C-hub front arms, and turnbuckle upper links
      • ,
    • Front and rear bumpers
      • ,
    ,

    This is the stunning looking and even better performing HSP ...

    Read more

    NitroTek

    SHENGQI 1/5TH PETROL RC MONSTER TRUCKS - HUMMER 2.4GHZ

    petrol rc Trucks are beasts with a massive feature ..." />

  • Petrol Trucks Scale
    		• 1/5
  • D/W
    		• Rear 2WD system, differential with built-in gears
  • Brakes
    		• Rear Disc
  • Speed
    		• 80km/h
  • Petrol Engine
    		• Single cylinder, two stroke, air-cooled, 23cc
  • Torque
    		• 1.8N.m
  • Power
    		• 1.58kw / 2.15 bhp
  • Fuel
    		• Petrol / engine oil (25
  • Fuel tank capacity
    		• 40 minutes
  • Trucks Start method
    		• pull start
  • LxWxH
    		• 700x530x350mm 
  • Trucks Tyres
    		• 190mm
  • Trucks Wheelbase (F/R)
    		• 480mm 
  • Tread
    		• 340mm(F)/370mm(R)

      ,
    , ,
      ,
    • Fully assembled petrol RC Truck
      • ,
    • Powerful pull start 23cc petrol engine 
      • ,
    • Heavy duty parts (many metal)
      • ,
    • Differential with built-in gear
      • ,
    • Fully adjustable oil-filled shocks
      • ,
    • Disc brake system
      • ,
    • CE/ROHS approved rc controller
      • ,
    • Strong 15kg/cm OEM Futaba servo
      • ,
    • Sealed electronics box for use on wet days
      • ,
    • Aluminium chassis
      • ,
    • Waibro Carburetor
      • ,
    • NGK spark plug
      • ,
    • 2.4G rc radio equipment
      • ,
    • 80 km/h - petrol trucks top speed
      • ,
    ,

    ShengQi petrol rc Trucks are beasts with a massive feature ...

    Read more

    NitroTek

    ATTACKER 1/8 NITRO RC BUGGY - REMOTE STARTER VERSION

  • Height
    		• 185mm
  • Length
    		• 505mm
  • Width
    		• 310mm
  • Wheel base
    		• 315~320mm
  • Track F/R
    		• 310mm
  • Ground clearance
    		• 30mm
  • Weight
    		• 3300g
  • Transmitter
    		• 2 channel

      ,
    ,

    A remote start upgrade is available as an option.

    , ,
      ,
    • 1/8 Scale Gas Powered Car
      • ,
    • Fully Assembled
      • ,
    • 4wd Shaft Drive System
      • ,
    • W/.18 Easy-To-Start Pull Start Powerful Engine
      • ,
    • Oil-Filled Aluminium Shocks
      • ,
    • Single Speed
      • ,
    • Front And Rear Bevel Differentials
      • ,
    • W/125cc Fuel Tank
      • ,
    • Quicker Steering And Fast Response
      • ,
    • Low Centre Of Gravity Design
      • ,
    ,

    The Attacker is our entry level 1/8 nitro buggy. You'll ...

    Read more

    NitroTek

    F-35 LIGHTNING 64MM GREY RC EDF JET PNP VERSION

  • Wing span
    		• 608mm 
  • Length
    		• 840mm 
  • Flying Weight
    		• 600g 
  • Wing Load
    		• 57g/dm2 
  • Wing area
    		• 8.7dm2 
  • Range
    		• 1000m

      ,
    • 9 gram servos 
      • ,
    • Brushless motor and 25A ESC 
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    • Is capable of the 'Cobra Manoeuvre'
      • ,
    ,

    The F-35 Lightning II is a, single-seat, single-engine, stealth multirole ...

    Read more

    NitroTek

    F14 TWIN 70MM JOLLY ROGER TOP GUN EDF RC JET PNP VERSION

  • Wingspan
    		• 1100mm
  • Length
    		• 1086mm
  • Flying Weight
    		• 1100-1300g
  • Twin motor
    		• Powerful 2430 outer runner brushless motor
  • Twin ESC
    		• 45A ESC 5A UBEC

      ,
    • Twin 70mm ducted fan
      • ,
    • With variable sweep wing, retract system
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Working swing wings
      • ,
    • Retractable landing gear
      • ,
    • Stunning paintwork
      • ,
    • Twin 70mm electric ducted fans
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep winged ...

    Read more

    NitroTek

    F-117 BLACKNIGHT STEALTH 70MM EDF RC JET PNP VERSION

  • Wingspan
    		• 734mm
  • Length
    		• 1100mm
  • Flying Weight
    		• 980g
  • Motor
    		• 2836 outer runner brushless motor 
  • ESC
    		• 45A ESC 5A UBEC

      ,
    • 70mm Ducted fan
      • ,
    • Seven 9g servos, one 17g servo
      • ,
    • Automatic landing gear system
      • ,
    • Steering front landing gear
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Automatic landing gear
      • ,
    • Stunning paintwork
      • ,
    • 70mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    The Lockheed F-117 Nighthawk is a U.S. Airforce stealth ground ...

    Read more

    NitroTek

    F16 64MM RC JET VECTORED PNP VERSION IN BLACK AND GREY

  • Wingspan
    		• 800mm
  • Length
    		• 1020mm
  • Wing Load
    		• 35 g/dm²
  • Fly Weight
    		• 1100g

      ,
    • 7 pcs 9g servos
      • ,
    • Brushless motor 2632 out runner KV4100
      • ,
    • 45A ESC 5A UBEC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • Thrust vectoring
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • ,
    • 64 mm electric ducted fan
      • ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This fighter is one of the classics, the F-16 is ...

    Read more

    NitroTek

    CESSNA 182 RED RC PLANE PNP VERSION

  • Length
    		• 1030mm
  • Flight weight
    		• 930g
  • Wingspan
    		• 1410mm
  • Wing load
    		• 34g/dm2

      ,
    • 4pcs 9G servos
      • ,
    • Out-runner Brushless motor, KV900
      • ,
    • 30A ESC
      • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
      • ,
    • 90% assembled
      • ,
    • Some Pre-installed electrics
      • ,
    • CAD engineering quality
      • ,
    • Stunning paintwork
      • , ,
    • State of the art components
      • ,
    • Can perform amazing aerobatics
      • ,
    ,

    This is a large scale model of the Cessna 182 ...

    Read more

    NitroTek

    GS RACING CL-1 1/8TH NITRO RC RALLYCROSS BUGGY

  • Length
    		• 520mm
  • Width
    		• 310mm
  • Height
    		• 220mm
  • Ground clearance
    		• 75mm
  • Wheelbase
    		• 325-330mm
  • Weight
    		• 3450g

      ,
    • Track: F:306mm, R:306mm
      • ,
    • Gear ratio: C:44/13T, F/R 38/11T
      • ,
    • 2.4G radio gear
      • ,
    , ,
      ,
    • 100% factory assembled 1/8th scale race buggy
      • ,
    • Full range of options/upgrades available
      • ,
    • Fully fitted with precision ball bearings
      • ,
    • Tuned exhaust system
      • ,
    • Powerful Team Infinity .25 Engine
      • ,
    • Pre-glued GS Road Spider tyres on GS dish wheels
      • ,
    • Front universal drive shafts
      • ,
    • Pre-painted and trimmed Kom Designs body with decals
      • ,
    ,

    The CL-1 is designed for those wanting ultimate performance with ...

    Read more

    NitroTek

    GS RACING XUT RTR 1/8TH SCALE NITRO RC TRUGGY 2.4G

  • Length
    		• 530mm
  • Width
    		• 420mm
  • Height
    		• 215mm
  • Ground Clearance
    		• 75mm
  • Wheelbase
    		• 370-375mm
  • Track
    		• F/R 330-360mm
  • Gear Ratio
    		• C 58/13T, F/R 38/11T
  • Weight
    		• 4100g

      ,
    , ,
      ,
    • 100% Factory Assembled 1/8th Scale Race Truggy
      • ,
    • Over 50% Compatible with Storm CL-1 Series Buggies
      • ,
    • Full Line of Options and Upgrade Parts Available
      • ,
    • Full Precision Engineered Ball Bearings
      • ,
    • Tuned .25 Exhaust System
      • ,
    • Powerful Infinity Big Block .25 Rear Exhaust Engine with Pull Start
      • ,
    • GS Dish Truggy Wheels with Pre-glued GS Cubic Truggy Tires
      • ,
    • Front Universal Driveshafts
      • ,
    • Aluminum 13mm Big Bore Oil-Filled Shocks
      • ,
    • Pre-Painted and Trimmed Korn Designs Body with Decals
      • ,
    • Professional 3mm Aluminum Hard-Coated Chassis
      • ,
    • Adjustable 3mm Aluminum Steering Plate
      • ,
    • Adjustable Servo Saver Pipe Set
      • ,
    • 145cc Big Fuel Tank
      • ,
    • Oversized Bearings in Front and Rear Hub System
      • ,
    ,

    The international race winning GS Racing is back in the ...

    Read more

    NitroTek

    GS RACING VISION PRO RTR NITRO RC CAR 2.4G

  • Length
    		• 380mm
  • Width
    		• 198mm
  • Height
    		• 104mm
  • Ground clearance
    		• F/R
  • Wheelbase
    		• 260mm
  • Track
    		• 172mm
  • Gear ratio
    		• 11.69
  • Weight
    		• 1700g
  • Tank
    		• 75cc
  • Radio equipment
    		• 2.4GHz with LCD display
  • Engine
    		• Team Infinity .18 Nitro

      ,
    ,
      ,
    , ,
      ,
    • Fully adjustable pivot ball suspension
      • ,
    • Finished pre-mounted body
      • ,
    • GS Racing camber clip system
      • ,
    • 75cc fuel tank with splash guard
      • ,
    • 2.4G Radio system included
      • ,
    • Sealed radio box with transponder mount
      • ,
    • GS fuel bottle and glowstarter included
      • ,
    • Powerful nitro engine
      • ,
    • 7075 aluminium alloy chassis – for lightness and strength
      • ,
    • Aluminium shock bodies with adjustable dampening system
      • ,
    • Front and rear sway bar system
      • ,
    • Lightened aluminium wheel hubs
      • ,
    • Aluminium 2 speed gear box system
      • ,
    • GS Racing camber clip system
      • ,
    ,
      ,
    ,

    The Vision Pro is GS Racing's top of the range ...

    Read more

    NitroTek

    GS RACING STORM EVO 25 1/8TH RC NITRO BUGGY

  • Length
    		• 490mm
  • Height
    		• 182mm
  • Ground clearance
    		• 22mm
  • Wheelbase
    		• 320-325mm
  • Tyres
    		• 116mm x 42mm
  • Weight
    		• 3350g
  • Radio
    		• 2.4G
  • Fuel tank
    		• 125cc

      ,
    • Track: F:256mm (adjustable), R:251mm
      • ,
    , ,
      ,
    • 100% factory assembled 1/8th scale race buggy
      • ,
    • Over 75% compatible with Storm series buggies
      • ,
    • Full range of options/upgrades available
      • ,
    • Fully fitted with precision ball bearings
      • ,
    • Tuned .25 exhaust system
      • ,
    • Powerful Team Infinity .25 Engine
      • ,
    • Pre-glued GS Road Spider tyres on GS dish wheels
      • ,
    • Front universal drive shafts
      • ,
    • Pre-painted and trimmed Kom Designs body with decals
      • ,
    • Low centre of gravity
      • ,
    • Dust guard front C-hub
      • ,
    • 125cc fuel tank with filter and adjustable pressure fitting
      • ,
    • Adjustable front/rear toe in and camber
      • ,
    • Front, centre and rear differentials
      • ,
    • 3 shoe clutch system
      • ,
    • Adjustable wheelbase
      • ,
    • Heavy duty suspension arms
      • ,
    • 4WD shaft driven transmission
      • ,
    • 46 tooth spur gear
      • ,
    ,

    The international race winning GS Racing is back in the ...

    Read more

    Follow us on

    Twitter Facebook f Linkedin in Google plus g
    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby